Can a water-damaged phone motherboard be fixed?
Detach the battery from your smartphone motherboard as soon as your reflexes become aware that it has gotten wet. The most important step to save your smartphone is this one. Remove the battery right away by opening the back cover. The battery should be taken out as quickly as possible. If you wait more than 30 seconds, there’s a danger the phone can short-circuit and possibly become irreparably damaged, or beyond repair.
Today, however, practically all phones come equipped with an internal battery, making this step difficult. Therefore, you can at least turn off the phone right away and dash to the closest mobile phone repair shop to have it opened, thoroughly dried, and examined. To protect the SIM card and memory card from harm, remove them as well. Hence ICFix Service provides Smart phone repair courses.
Mobile Phone Fault Finding using Thermal Camera – ICFix Services
Reason: Water is a superb electrical conductor. The motherboard (the green printed circuit board inside a phone) will therefore experience a short circuit if water gets inside of it. The current will start flowing along the motherboard wherever there is water. Some components only use 1 volt (or less) of power, therefore giving them 3.8 volts straight from the battery could cause damage.
- A blowtorch
- A heater for hair
- Blazing sunlight
- Every additional item or technique can dry your device.
If you’re using a hair dryer, be sure to blast air over your phone in a sweeping motion to cover all the potential spots where water droplets may have become clogged. Pay close attention to the SIM tray, charging port, and headset jack. Blow warm air into the motherboard and its components from both sides to ensure proper drying.
You can enroll in the cell phone repair course offered by ICFix Service and learn it at your convenience.
Water includes minerals, therefore over time, it could corrode the motherboard’s surface. Therefore, cleaning the entire motherboard with IPA (Iso Propyl Alcohol), spirit, or thinner is advised but not required.
After completing the aforementioned steps, you must use a multimeter to determine whether or not your smartphone has been shorted out. You can put your phone back together and turn it on if it is not short. Your phone ought to be in its previous, functional state if you’re lucky.
If you are unsuccessful, a reputable mobile phone repair service facility may be required to fix your phone. Additionally, you will probably need to let a professional handle the work if any other issues arise with the handset as a result of this accident and you are unable to solve them.
I strongly recommend checking with the ICFix Service before enrolling in any courses. Contact: +91 81482 11211
Recent Comments