Can I replace an eMMC with an SSD?
The computer’s internal flash storage cannot be increased. The internal storage is fixed to the board, despite the fact that you can insert a USB drive or MicroSD card into the side slot. In light of this, ICFix service offers eMMC repair software. It is possible and simple to complete this. Simply buy a trustworthy disc copying program like AOMEI Backupper. You can perform the upgrade using this disc cloning tool because it is the safest and most efficient. However, you can upgrade the current eMMC with a higher-capacity one by yourself or by hiring a professional using a hot-air rework station. Hence ICFix Service provides eMMC training courses in Chennai.
You need to replace your eMMC SSD now that the time has come. The cost of solid-state drives has decreased over time, making eMMC storage replacement simple. Downloading the AOMEI Back-upper to your computer is the first thing you need to do. The tool’s “Clone” capability is used to convert eMMC to SSD. This work is simple to complete by following the listed comprehensive procedures. Additionally, it goes faster.
Install software:
Connect the SSD to a PC and ensure that it is recognized as the first step. Next, install and launch AOMEI Backupper on your computer.
Choosing Disc Clone:
The “Clone” option is located on the left side. Then select “Disc Clone” from the menu.
Select the Source Drive:
Before pressing “Next,” select the source drive, a 64GB eMMC.
Decide on the destination drive:
Selecting the destination disc is necessary. Choose the SSD that is attached to your PC in this situation. Press “Next.”
The SSD Alignment button:
The read-write speed of the destination SSD needs to be increased. So, choose the box that is shown before the “SSD Alignment” checkbox. Press the “Start Clone” button to initiate the cloning procedure.
Reorder the boots:
This step is optional yet necessary. As soon as the cloning procedure is complete, modify the boot order in BIOS. To boot from the cloned SSD instead of the old hard disc, you can do so. Using the AOMEI Backupper makes cloning eMMC to SSD stress-free. Make sure you only save one storage drive—ideally, a brand-new SSD—on your computer. By doing this, you can switch out your eMMC storage for SSD in the future and utilize it fully. Windows counts one automatically.
I strongly recommend checking with the ICFix Service before enrolling in any courses. Contact: +91 81482 11211.
Recent Comments