How do I fix a water-damaged mobile cell phone?
It must be taken out of the liquid right away. The more liquid seeps into different inlets the longer it stays there. Leave the phone off after turning it off. Take off the protective covering. If at all feasible, open the back and take out the microSD card, battery, and SIM card (if you have one). Having trouble taking out the SIM card? See our iPhone and Android user guide. Hence ICFix Service provides Mobile chip-level training courses in Chennai.
Your phone should be dried with a cloth or paper towel. Avoid rubbing the mobile phone because doing so could unintentionally push fluids into the more delicate areas of the device. You might try (very) carefully cleaning the area around the phone’s creases and openings if it was entirely submerged in order to remove extra water. Do not expose your phone to the sun’s heat. Store it somewhere dry and cool.
We do not advise using the advice you may have heard to put your phone in rice if it gets wet. Use silica gel packets instead, like the ones that frequently accompany new items like a pair of shoes, as they have been shown to be considerably more effective. Place the phone inside a plastic zip-top bag filled with silica gel packets. Give your phone 24 to 48 hours in the bag.
Turn on your phone once it has completely dried. Charge it completely before trying again if it doesn’t turn on immediately. If your phone restarts, that’s excellent! Nonetheless, keep an eye on it over the coming week or so because occasionally, certain functions won’t function as intended.
There are a few indicators that your gadget has suffered water damage: Check beneath the screen for any signs of water or evaporation (or dried water traces).
Look for noticeable corrosion at the ports.
Be sure to look at the Discolored Liquid Damage Indicator (LDI). The headphone jack, battery compartment, or SIM tray slot are the traditional locations for the LDI. The LDI will show up crimson or maroon if there is water damage to your phone.
Putting your water-exposed device in rice may help it absorb some moisture, according to ICFix Service Specialists. It might, however, also result in additional problems for your phone, such as the entry of dust and dried starch (a rice byproduct) into its crevices and cracks. Moreover, rice has the potential to get stuck in your phone’s charging port or headphone socket, which may be quite challenging to remove because rice expands when exposed to fluids.
It is not advised to blow-dry your phone after it has been exposed to water. While it might help to dry out the moisture on the surface, it won’t do much to dry up the moisture inside your device, and the heat could permanently harm your phone’s internal parts.
These are the procedures to follow in order to get water out of a phone’s charging port:
● Switch off the gadget.
● Remove the case from your phone if it is in one.
● Take the battery out (if you can).
● With a dry, absorbent towel, clean the gadget.
● Carefully blow on the surplus fluid to remove it, or use compressed air to do it.
● Place it somewhere to dry out, open ports facing downward.
To remove water from your iPhone or Android phone speakers, try these tips:
● Gently wipe the area surrounding the speakers with a cotton swab.
● The item should be turned off and set upright with the speakers pointing downward to dry out. This will encourage extra water to escape.
I strongly recommend checking with the ICFix Service before enrolling in any courses. Contact: +91 81482 11211
Recent Comments