How to Fix a Laptop Power Jack without Soldering?
Laptops are computerized devices that can be utilized remotely by placing a device on your lap without connecting to an input current source. In place of an external current source, laptops include a built-in battery that stores electric energy as DC current and gives it to the device to operate. Hence ICFix Service provides Laptop chip-level training courses in Chennai.
The laptop’s power jack is used to connect the AC charger, which transforms AC electricity into DC current that may be stored in the battery and used at a later time. However, it has been noted that the laptop’s power port is not functioning, so in this guide, we’ll look for the best solutions to fix the laptop power jack without soldering it.
When you connect the charger to the power port and it doesn’t show any charging indication because the battery is dead, it is often the case that the problem is with the battery rather than the power connector. This leads you to believe that the power jack is the problem.
Remove the battery to determine if the problem is with the power jack or the battery. The laptop charger should then be connected to an AC power source by plugging it into the power jack. If, after doing so, the laptop charger indicator appears, the problem is with the battery. Hence, replace it. If there is still no sign of charging, reconnect the battery to its position since the problem is with the power jack, and we will discover solutions to remedy it in the next parts.
The power jack may not function for a variety of reasons, but the following are the most typical ones:
● The power jack’s internal pins have been damaged.
● The power jack is broken throughout.
● The power jack is getting warm.
● The weak connection between the circuit and the power jack.
You may fix a damaged laptop power jack or damaged pins by swapping out the old jack for a new one. But, if you are traveling or attending a conference and do not have time to solder the power jack, you can still attach it with the aid of a glue gun. However, keep in mind that this method is only advised if you just need to temporarily solve this problem.
If your laptop briefly loses power while still functioning normally or begins to ignite, there may be a loose connection between the power connector pins and the circuit board.
To fix it, disconnect the charger, open the laptop’s rear cover, then access the power jack, and separate it from the connector. Clean the area surrounding the connector with a cotton bud, and then carefully reattach the power jack to its connector, applying gentle pressure with your hand to ensure that it is positioned correctly on the connector.
If the laptop’s power jack is still not working or has been soldered after trying the aforementioned fixes, it is advised to speak with the laptop’s authorized maker or a qualified individual with technical knowledge who is experienced in fixing power jacks.
I strongly recommend checking with the ICFix Service before enrolling in any courses. Contact: +91 81482 11211.
Recent Comments